-40%

BLUM BIFOLD HINGE KIT for LAZY SUSAN, 1/2" overlay, face-frame/frameless, #c-151

$ 22.14

Availability: 24 in stock
  • Color: zinc
  • MPN: 71T6550, 79T8500
  • Condition: New
  • Suitable For: Bi-Fold Door
  • Brand: Blum
  • Material: Steel
  • Finish: Nickel Plated
  • Type: Bi-Fold
  • Features: Self Closing
  • Country/Region of Manufacture: Austria

    Description

    THIS IS A BLUM COMPLETE HINGE KIT FOR BI-FOLD LAZY SUSAN DOORS....
    ...For 3/8" to 5/8" overlay (
    Overlay
    is the distance that the 1st door, on the side where that door meets the actual cabinet, overlays the cabinet side panel or face frame)
    FOR TRADITIONAL FACE FRAME OR FRAMELESS EURO STYLE CABINETRY
    BTW...SHIPPING IS FREE!
    THIS KIT UTILIZES:
    2) 170 DEGREE CLIP HINGES #71T6580, self-closing (if dowels are removed, this hinge becomes #71T6550)
    2) 60 DEGREE BI-FOLD CLIP HINGES #79T8530.10, fully adjustable (if dowels are removed, this hinge becomes #79T8500.10)
    2) 0mm CLIP MOUNTING PLATES, #175L6600.22 (used on the bifolds)
    2) 3mm CLIP MOUNTING PLATES, #175L6630.22 (used on the 170's for 1/2-5/8" overlay)
    2) 6mm CLIP MOUNTING PLATES, #175L6660.22 (
    used on the 170's for 3/8-1/2" overlay) (these plates not shown in picture)
    DOOR BUMPERS AND SCREWS
    INSTRUCTION PAGES ARE INCLUDED IN KITS!
    MY OTHER LAZY SUSAN KITS AVAILABLE THROUGH EBAY:
    #C-150   For 3/4" overlay, face frame or frame less type cabinets (heavy duty plate)
    #C-152   For 3/4" overlay, frame less type cabinets
    #C-153   For 5/8" overlay, face frame or frame less type cabinets
    #C-154   UNIVERSAL KIT For 1/2", 5/8" or 3/4" overlay, face frame or frame less cabinetry
    #C-155   For 5/8" overlay, frame less cabinetry only (Euro)
    Please note that this kit is NOT available in this configuration from BLUM or BLUM DISTRIBUTORS. I have assembled this kit so that you would get everything you need all in one kit to install doors on a 90-degree corner cabinet. These hinges are complete with three-way adjustment screws. These 170 hinges WILL accept the optional soft-closing Blumotion shock absorber; however, you will find it actually interferes with closing the doors at normal speeds.
    It is your responsibility to determine if this kit will work for your installation! If you have questions, please contact me.
    Technical info:
    All four hinge bores use a 35mm bit drilled 1/2" deep
    .
    The 170-degree hinge bore is in 5mm from edge of door (this would be 22.5mm to center).
    The Bi-fold hinges require a bore distance from the door edge to the CENTER of 12.5mm. (this is a partial hole. A test bore is strongly advised)
    SHIPPING IS FREE! Your order will go out in a USPS flat-rate box (1-3 day delivery) to anywhere the Post Office will deliver. This includes Alaska, Hawaii, Puerto Rico and other US Territories.
    Please contact me with any questions or before leaving negative feedback.
    Thanks for looking!
    Calculating door sizes
    SEE PICTURE AT TOP of included paperwork
    The doors for a BLUM
    bi-fold application
    can be of equal or unequal width. To
    calculate the door width (DW) of each door
    follow the step-by-step below:
    Step 1.
    Add the interior width to the side
    panel width (W)
    Step 2.
    Subtract door thickness (T) and
    reveal (R)
    Step 3.
    Subtract gap (G) bumper
    Thickness (1/8

    ) behind adjacent door
    Formula:
    DW = (IW + W) minus T minus
    R minus G
    Example in metric:
    DW = (500 + 19) -19 -3

    1
    DW = 496 mm
    TYPICAL FRAMELESS 36

    BASE CABINET EXAMPLE in ENGLISH: Door width= 11
    ¼”
    (interior width) +3/4

    (frameless side panel thickness)

    that

    s 12

    From that, subtract
    ¾”
    (for door thickness), Also subtract 1/16

    (for reveal), and 1/8

    (for Gap or door bumper) = This leaves a door width of 11 1/16

    .
    TYPICAL FACE-FRAME 36

    BASE CABINET EXAMPLE in ENGLISH, assuming end face-frames widths are 1
    ½”
    and using the 6mm plates provided (for
    ½”
    overlay):
    Door width= 10 1/2

    (interior width) + 1 1/2

    (end frame WIDTH)

    that

    s 12

    From that, subtract
    ¾”
    (for door thickness), Also subtract 1

    (for reveal), and 1/8

    (for Gap or door bumper) = This leaves a door width of 10 1/8

    .
    In ALL cases, a 1/16

    radius outer edge detail is preferred on the one long edge of each door where both doors meet at 90 degrees.
    ABBREVIATIONS:
    S
    DW=
    Door Width
    G=
    Gap (1/8

    bumpers provided in kit)
    H=
    Plate Height (0mm or 6mm (provided in kit)
    IW=
    Interior Width
    R=
    Reveal
    T=
    Door Thickness
    W=
    Side Panel Width
    5-day handling is for larger packages. 95% of our packages are mailed next day.