Digital Coating Thickness Gauge Non-magnetic Painting Tester Handheld LCD Screen

Description

Shop Category
Store Home
Automotive Tester
Digital Multimeter
Digital Clamp Meter
Voltage Tester
Environment Tester
Battery Tester
Metal Detector
Pen Probe Digital Multimeter
Stud Finder
Wood Moisture Tester
Handheld Digital Scopemeter
Professional Tester
Home Meter
Netcable Tester
Other
Digital Coating Thickness Gauge Non-magnetic Painting Tester Handheld LCD Screen
Note:
Orders from the USA will all be shipped out via our US warehouse. If you order from outside of US the product will be shipped from China.
This tester is designed to not-destructively measure the thickness of non-magnetic coatings(including paint,enamel,plastic,epoxy,etc)on iron,steel or aluminum.
Notice:
In order to obey the shipping security rules and passing the customs security check. We had put a insulation strip under the battery to make it insulated. You need to take the strip off and re-install the battery for the first-use.
Specification
Type:
Painting Thickness Tester
Measuring Range:
0.0~2.0mm / 0~80mil
Accuracy:
2%rdg ± 0.1mm, or 2%rdg
± 4mil (Note: Accuracy is guaranteed at the operating temperature of 23°C ± 5°C and relative humidity of not more than 75%)
Resolution:
0.1mm / 1mil
Power Supply:
3V button cell, CR2032 or equivalent, 1 piece
Operating Condition:
0°C~40°C, Relative humidity
Temperature Coefficient:
0.05x(2%rdg ± 0.1mm, or 2%rdg ± 4mil)/°C(28°C)
Size:
6.9*3.8*2cm
Weight:
About 23g
Operating Instruction
1. Hold the tester and make sure that it is as least 20cm away from the object to be tested and other objects.Then press the "TEST"button to turn on the tester."--"appear on the display and flashed,meanwhile the unit "mm"appear.
2. Press the "UNIT"button to select desired unit - mm or mil.
3. Place the tester's probe perpendicularly on the surface to be tested, the display will show the coating thickness.
*If the display shows"--",it means that the tester does not detect any iron,steel or aluminum substrate.
*If the display shows"OL",it means that the coating thickness exceeds the tester's measuring range.
*If the display shows"- 0",it means that the probe has wear or the substrate under the coatings may be other kind of metal other than iron,steel or aluminum.
4. When you make measurement,the reading will remain on the display if you move qucikly the tester away from the surface under test;and you can press the "TEST"button to delete this reading,the display will show "--"
5. If you do not press any button and the tester does not detect the presence of steel, iron or aluminum for about 30 seconds,the tester will turn off automatically. If you want to turn off the tester manually,press and hold down the "TEST" button for more than about 1 second.
Item Specifics
Brand
all-sun
Country/Region of Manufacture
China
Type
Thickness Gauge
Warranty
Yes
Measuring Range
0.0 mm to 2.0 mm / 0 mil to 80 mil
Accuracy
2% rdg ± 0.1mm, or 2% rdg ± 4mil
Resolution
0.1mm / 1mil
Power Supply
3v button cell, CR2032 or equivalent, 1pieces
Temperature Coefficient
0.05x (2% rdg±0.1mm, or 2% rdg±4mil) / Temp
Operating Condition
0°C to 40°C,
Storage Condition
-10°C to 50°C,
Size
6.9 x 3.8 x 2 cm
Weight
about 23g (including button cell)
Manufacturer Part Number
allsunEM2271
Set or Single Item
Single Item
UPC
788537552505
Copyright of XXXX. All rights reserved.
Powered by SoldEazy
On Apr-22-19 at 01:38:54 PDT, seller added the following information: