-40%

Made For a R410a, R-410a, Refrigerant, Screw-On Tank Gauge & Hose Kit, A/C Gauge

$ 31.65

Availability: 64 in stock
  • Interchange Part Number: R410A
  • Manufacturer Part Number: M2-460
  • Surface Finish: 410A
  • Warranty: Other
  • Condition: New
  • Returns Accepted: ReturnsNotAccepted
  • Other Part Number: R-410A
  • Brand: JB Industries

    Description

    Gregoriou Brothers Refrigeration Since 1979
    Frosty-Freeze
    Made For a R410a, R-410a, Refrigerant, Screw-On Tank Gauge & Hose Kit, A/C Gauge
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    This is a very special gauge set up that will screw onto, by hand,
    to the 25 lb. or 15 lb. jugs of refrigerant cans that have the 1/4" male flare fitting and allow you to direct charge the system you are working on.
    Includes a 36"
    Blue or Yellow,
    (depending on what we have in stock)
    Charging hose with the 1/4 Fitting on the hose end.
    The charging hose end does have a valve core depressor and can be used on all systems that have the 1/4" male flare fitting with or without the valve core like, R22, R12, R502, R404A and some of the R410a systems still use the 1/4" male flare fitting.
    You don't even have to take the jug out of the box anymore!
    NOTE: Almost "ALL" of these size cans have the 1/4" male flare fitting, the only can that does not is the automotive jugs of R134a that say "automotive R134a", Those jugs have the 1/2" ACME fitting which is a little larger then the 1/4". We do have adapters for those cans if you need one.
    This particular gauge is set-up for the following
    R410A
    Include the R410a adapter for the systems with the 5/16" larger suction hose fitting.
    If you shut the tank valve off it will show you the system pressure.
    You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
    We also sell this setup for R-410a, R12, R134a, R404a and Envirosafe refrigerants.
    It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
    We have the same set-up with different hose lengths as well.
    Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
    Please visit our eBay store and click on the can taper category.
    The stickers in the picture are not included and are for reference only!
    Thank you!
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT. THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT. THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT. This is a very special gauge set up that will screw onto, by hand, to the 25 lb. or 15 lb. jugs of refrigerant cans that have the 1/4" male flare fitting and allow you to direct charge the system you are working on. Includes a 36" Blue or Yellow, (depending on what we have in stock) Charging hose with the 1/4 Fitting on the hose end. The charging hose end does have a valve core depressor and can be used on all systems that have the 1/4" male flare fitting with or without the valve core like, R22, R12, R502, R404A and some of the R410a systems still use the 1/4" male flare fitting. You don't even have to take the jug out of the box anymore! NOTE: Almost "ALL" of these size cans have the 1/4" male flare fitting, the only can that does not is the automotive jugs of R134a that say "automotive R134a", Those jugs have the 1/2" ACME fitting which is a little larger then the 1/4". We do have adapters for those cans if you need one. This particular gauge is set-up for the following R410A Include the R410a adapter for the systems with the 5/16" larger suction hose fitting. If you shut the tank valve off it will show you the system pressure. You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go. We also sell this setup for R-410a, R12, R134a, R404a and Envirosafe refrigerants. It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well. We have the same set-up with different hose lengths as well. Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured! Please visit our eBay store and click on the can taper category. The stickers in the picture are not included and are for reference only! Thank you!
    Gregoriou Brothers Refrigeration Since 1979
    Frosty-Freeze
    Made For a R410a, R-410a, Refrigerant, Screw-On Tank Gauge & Hose Kit, A/C Gauge
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    This is a very special gauge set up that will screw onto, by hand,
    to the 25 lb. or 15 lb. jugs of refrigerant cans that have the 1/4" male flare fitting and allow you to direct charge the system you are working on.
    Includes a 36"
    Blue or Yellow,
    (depending on what we have in stock)
    Charging hose with the 1/4 Fitting on the hose end.
    The charging hose end does have a valve core depressor and can be used on all systems that have the 1/4" male flare fitting with or without the valve core like, R22, R12, R502, R404A and some of the R410a systems still use the 1/4" male flare fitting.
    You don't even have to take the jug out of the box anymore!
    NOTE: Almost "ALL" of these size cans have the 1/4" male flare fitting, the only can that does not is the automotive jugs of R134a that say "automotive R134a", Those jugs have the 1/2" ACME fitting which is a little larger then the 1/4". We do have adapters for those cans if you need one.
    This particular gauge is set-up for the following
    R410A
    Include the R410a adapter for the systems with the 5/16" larger suction hose fitting.
    If you shut the tank valve off it will show you the system pressure.
    You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
    We also sell this setup for R-410a, R12, R134a, R404a and Envirosafe refrigerants.
    It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
    We have the same set-up with different hose lengths as well.
    Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
    Please visit our eBay store and click on the can taper category.
    The stickers in the picture are not included and are for reference only!
    Thank you!
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
    This is a very special gauge set up that will screw onto, by hand,
    to the 25 lb. or 15 lb. jugs of refrigerant cans that have the 1/4" male flare fitting and allow you to direct charge the system you are working on.
    Includes a 36"
    Blue or Yellow,
    (depending on what we have in stock)
    Charging hose with the 1/4 Fitting on the hose end.
    The charging hose end does have a valve core depressor and can be used on all systems that have the 1/4" male flare fitting with or without the valve core like, R22, R12, R502, R404A and some of the R410a systems still use the 1/4" male flare fitting.
    You don't even have to take the jug out of the box anymore!
    NOTE: Almost "ALL" of these size cans have the 1/4" male flare fitting, the only can that does not is the automotive jugs of R134a that say "automotive R134a", Those jugs have the 1/2" ACME fitting which is a little larger then the 1/4". We do have adapters for those cans if you need one.
    This particular gauge is set-up for the following
    R410A
    Include the R410a adapter for the systems with the 5/16" larger suction hose fitting.
    If you shut the tank valve off it will show you the system pressure.
    You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
    We also sell this setup for R-410a, R12, R134a, R404a and Envirosafe refrigerants.
    It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
    We have the same set-up with different hose lengths as well.
    Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
    Please visit our eBay store and click on the can taper category.
    The stickers in the picture are not included and are for reference only!
    Thank you!