PROMAX, SK-6002 Pre-Filter Conversion Kit, Refrigerant Recovery Filter Drier

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
PROMAX, SK-6002 Pre-Filter Conversion Kit, Refrigerant Recovery Filter Drier
PROMAX Part# SK-6002
Pre-Filter Conversion Kit for Refrigerant Recovery Units
Filter Drier
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the
dilemma
that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
Robinair Part# 10034
Pre-Filter Jumpber Hose
1/4" x 1/4" Female Flare Swivel
This hose is used on a prefilter used for a refrigerant recovery machine.
It goes between the unit and the pre-filter.
Overall Length: 4"
Actual Hose Length Between Flare Nuts: 2-1/4"
Product Details
Robinair
Model number: 100345
This hose is used on the Robinair "FLCK-1" pre-filter and the PROMAX SK-6002 Pre-filter kit.
It replaces the obsolete swivel fitting (p/n MF1275) used on earlier Promax and Robinair Refrigerant Recovery units.
Allows the use of standard Male/Male Filter.
PROMAX Part# SK-6002 Pre-Filter Conversion Kit for Refrigerant Recovery Units Filter Drier If you own a refrigerant/refrigerant recovery/recycle unit then you know how important it is to take care of it. Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor. If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit. Now comes the dilemma that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter. This kit takes care of both of those problems. This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters. The hose also allows for some room between the recovery unit inlet and the pre-filter. Includes everything pictured! INCLUDES; (1) 1/4" Male x 1/4" Male Filter Drier (1) 1/4" x 1/4" Female Flare Jumper Extension hose with swivel ends. Robinair Part# 10034 Pre-Filter Jumpber Hose 1/4" x 1/4" Female Flare Swivel This hose is used on a prefilter used for a refrigerant recovery machine. It goes between the unit and the pre-filter. Overall Length: 4" Actual Hose Length Between Flare Nuts: 2-1/4" Product Details Robinair Model number: 100345 This hose is used on the Robinair "FLCK-1" pre-filter and the PROMAX SK-6002 Pre-filter kit. It replaces the obsolete swivel fitting (p/n MF1275) used on earlier Promax and Robinair Refrigerant Recovery units. Allows the use of standard Male/Male Filter.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
PROMAX, SK-6002 Pre-Filter Conversion Kit, Refrigerant Recovery Filter Drier
PROMAX Part# SK-6002
Pre-Filter Conversion Kit for Refrigerant Recovery Units
Filter Drier
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the
dilemma
that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
Robinair Part# 10034
Pre-Filter Jumpber Hose
1/4" x 1/4" Female Flare Swivel
This hose is used on a prefilter used for a refrigerant recovery machine.
It goes between the unit and the pre-filter.
Overall Length: 4"
Actual Hose Length Between Flare Nuts: 2-1/4"
Product Details
Robinair
Model number: 100345
This hose is used on the Robinair "FLCK-1" pre-filter and the PROMAX SK-6002 Pre-filter kit.
It replaces the obsolete swivel fitting (p/n MF1275) used on earlier Promax and Robinair Refrigerant Recovery units.
Allows the use of standard Male/Male Filter.
PROMAX Part# SK-6002
Pre-Filter Conversion Kit for Refrigerant Recovery Units
Filter Drier
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the
dilemma
that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
Robinair Part# 10034
Pre-Filter Jumpber Hose
1/4" x 1/4" Female Flare Swivel
This hose is used on a prefilter used for a refrigerant recovery machine.
It goes between the unit and the pre-filter.
Overall Length: 4"
Actual Hose Length Between Flare Nuts: 2-1/4"
Product Details
Robinair
Model number: 100345
This hose is used on the Robinair "FLCK-1" pre-filter and the PROMAX SK-6002 Pre-filter kit.
It replaces the obsolete swivel fitting (p/n MF1275) used on earlier Promax and Robinair Refrigerant Recovery units.
Allows the use of standard Male/Male Filter.