Robinair FLCK-1 Pre-Filter Conversion Kit, For Refrigerant Recovery Units, NEW

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Robinair FLCK-1 Pre-Filter Conversion Kit, For Refrigerant Recovery Units, NEW
(1) SUPCO CO32 Filter
(1) W30-1, 1/8" NPT Male x 1/4" Male Flare
(1) Hose Approx. 6" Overall length 1/4" x 1/4" Knurl Female Swivel Flare
(2) 1/4 Caps with straps
Robinair FLCK-1 Filter Conversion Kit New
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
(2) 1/4" Female Flare caps with retaining strap.
(1) 1/4 Male Flare  x 1/8" NPT-Male  Brass Union
Protect your expensive piece of recovery equipment with this inexpensive kit!!
(1) SUPCO CO32 Filter (1) W30-1, 1/8" NPT Male x 1/4" Male Flare (1) Hose Approx. 6" Overall length 1/4" x 1/4" Knurl Female Swivel Flare (2) 1/4 Caps with straps Robinair FLCK-1 Filter Conversion Kit New If you own a refrigerant/refrigerant recovery/recycle unit then you know how important it is to take care of it. Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor. If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit. Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter. This kit takes care of both of those problems. This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters. The hose also allows for some room between the recovery unit inlet and the pre-filter. Includes everything pictured! INCLUDES; (1) 1/4" Male x 1/4" Male Filter Drier (1) 1/4" x 1/4" Female Flare Jumper Extension hose with swivel ends. (2) 1/4" Female Flare caps with retaining strap. (1) 1/4 Male Flare x 1/8" NPT-Male Brass Union Protect your expensive piece of recovery equipment with this inexpensive kit!!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Robinair FLCK-1 Pre-Filter Conversion Kit, For Refrigerant Recovery Units, NEW
(1) SUPCO CO32 Filter
(1) W30-1, 1/8" NPT Male x 1/4" Male Flare
(1) Hose Approx. 6" Overall length 1/4" x 1/4" Knurl Female Swivel Flare
(2) 1/4 Caps with straps
Robinair FLCK-1 Filter Conversion Kit New
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
(2) 1/4" Female Flare caps with retaining strap.
(1) 1/4 Male Flare  x 1/8" NPT-Male  Brass Union
Protect your expensive piece of recovery equipment with this inexpensive kit!!
(1) SUPCO CO32 Filter
(1) W30-1, 1/8" NPT Male x 1/4" Male Flare
(1) Hose Approx. 6" Overall length 1/4" x 1/4" Knurl Female Swivel Flare
(2) 1/4 Caps with straps
Robinair FLCK-1 Filter Conversion Kit New
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includes a Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose also
allows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
INCLUDES;
(1) 1/4" Male  x  1/4" Male Filter Drier
(1) 1/4"  x   1/4"  Female Flare Jumper Extension hose with swivel ends.
(2) 1/4" Female Flare caps with retaining strap.
(1) 1/4 Male Flare  x 1/8" NPT-Male  Brass Union
Protect your expensive piece of recovery equipment with this inexpensive kit!!